Home All Products (14) PH / ORP Transmitter

PH / ORP Transmitter

True

Need More Info

Electronet series PH-100S are PH / ORP transmitters used for various industrial applications. It can accept input from pH / ORP electrode & pH / ORP signal is transmitted in the form of electrical 4 - 20 mA signal. The on-line pH / ORP indication is provided through LCD. Span / Zero adjustments are easily accessibly. These transmitters are suitable for any make of electrode. TECHNICAL SPECIFICATIONS PH/ORP TRANSMITTER Model : PH-100S CAT/PH-100S-R2 Type of Input : From pH/ORP Electrode (Compatible to any make Electrode) Type of Output : 4 - 20 mA DC, 2 wire Isolated Display : COG Graphics LCD Calibration Range : 0 to 14 pH / +/-2000 mV Calibration Method : 3 Point buffer(For pH Only) Temperature Compensation : Auto / Manual through RTD, Pt 100 sensor for 0-125 °C Accuracy : +/- 0.05 pH / +/-3mV Isolation : 1.4 KV between Input, Output & Power Supply Process Connection : 1) Through BNC connector 2) Through Terminals Power Supply : 24 V DC, External Power Consumption : < 50 mW Repeat-ability : +/-0.05% of span, at 25 °C Sensitivity : +/-0.02pH Stability : 0.02pH per 24 Hours, non- cummulative Response Time : < 1000 mSec Temperature Coefficient : +/- 0.05% per °C Temperature Drift : +/- 0.02% of span per°C(zero & span)at 25 °C Dimensions : 135 (H) x 182 (W) including cable gland x 200 (D) in mm approx. Electrical Connections : 3/4” ET Mounting : 2” Pipe Mounting Weight : 0.5 kg Operating Conditions : Temperature -20 to 75 °C / Humidity 5 to 95% non condensing Housing : Cast aluminum with epoxy coating NEMA 4X (IP-65) Digital Communication : HART ACCESSORIES (Optional) Temperature Compensation Sensor : RTD, Pt 100 (0 - 125 °C) Flow Through Assembly : SS / PP Electrode Cleaning System : SS / PP

2017-02-09T06:37:07

mW mV KV RTD make mSec Type mA DC input Output

True

You might like these

Instrumentation Fittings

The DT300 “Touché” Intelligent Density Transmitter is an instrument developed for the continuous, online measurement of liquid density and concentration, directly in the industrial process. Its pioneer technology consists of a capacitive type differential pressure sensor coupled to a pair of pressure repeaters immersed in the process. A temperature sensor located between the two pressure repeaters is used to compensate the temperature variations in the process fluid. A dedicated software, by means of an algorithm, calculates the fluid density. Depending on the industrial process, density may be expressed in g/cm3, Kg/m3, lb/ft3, Specific Gravity, Brix degree, Gay-Lussac degree, Baumé degree, Plato degree, INPM degree, API degree, Solids %, Concentration %, etc. Designed for process control applications, these 2-wire transmitters generate a signal proportional to the concentration/density. Digital communication for remote calibration and monitoring is also provided. # Accuracy ±0.0004 g/cm³ (±0.1 °Brix); # Temperature compensation; # Range 0.5 g/cm³ - 5 g/cm³; # Standard industrial and sanitary process connection; # Digital LCD indicator; # Direct density or concentration readout in engineering units; # Suitable for dynamic and static liquids; # Two wire loop powered; # Several different wetted materials; # Single integrated unit without moving parts; # Factory calibration and Self calibration; In field re-calibration:  No standard reference required;  No lab calibration required;  No process shutdown. # Continuous/Self diagnostics; # Weather proof, explosion proof and intrinsically safe; # The control strategy is built from direct instantiation and deletion of function blocks; # Configuration and Parameterization all through open and interoperable configuration tools available in the market, e.g., based on PC or PCMCIA Cards or operations by the local adjustment switches (should be used with a LCD display); # Use of the Analog Input function; # Totally digital; including sensor, electronics and communication; Configurable Local Adjustment (Foundation fieldbusTM and PROFIBUS PA); # Easy firmware upgrade (via Flash Memory Interface) for Foundation fieldbus TM and PROFIBUS PA; # Easy maintenance; # Three technology options: HART®, Foundation fieldbusTM, PROFIBUS PA.

Density / Concentration Transmitter

Electronet series LCS-02 are capacitance type level switch. Vessel wall & probe forms two electrodes. If vessel is of non conductive material, the probe will be double rod type. The distance between electrode & surface area of electrodes remain unchanged. The variable is the depth of the material being measured which represents the dielectric constant between two electrodes. Air & vacuum have relative dielectric constant as 1 & that of liquids, it is greater than 1. The capacitance of the capacitor therefore depends on how much material lies between the probe & vessel wall i.e. Whether the probe is covered with or free from material. The capacitor changes with change in level of the material & provides switching output at desired preset level.

CAPACITANCE LEVEL SWITCH

Electronet series CT-100S are Conductivity transmitters used for various industrial applications. It can accept input from conductivity electrode of cell constant 0.01 / 0.1 / 1 & conductivity signal is transmitted in the form of electrical 4 -20 mA signal. The on-line conductivity indication is provided through LCD. Span/Zero adjustments are easily accessible.

Conductivity Transmitter

Electro mag flow transmitter are micro-controller based 2 wire full bore type electromagnetic flow transmitters specially used for various industrial applications. These flow transmitters accurately measure the flow rate of conductive liquids & slurries in closed pipes. Due to its simple & rigid design, the flow transmitter is an obstruction less & maintenance-free instrument in place of conventional mechanical flow measuring device. The use of ‘Pulsed DC’ technology offers highest ability & better measuring accuracy in the form of electrical signal 4-20 mA DC linearly proportional to volumetric flow, The instrument is based on Faraday’s law of electromagnetic induction. A magnetic field is generated by the instrument in the flow tube. The fluid flowing through this magnetic field generates a voltage that is proportional to the flow velocity & corresponding electrical output is provided with respect to ensuring voltage.

Magnetic Flow Meter

Smart Touch panel HMI

PLC - 200V

PLC - 300S